Glacier Tanks
Chillers & Burners
Related Categories
Click here to go to "Commercial Glycol Chillers" 

G&D glycol chillers are designed to function on the exterior of a building, thus freeing up valuable floor space on the interior. G&D commercial chillers are fully self-contained, all inclusive units that pump chilled glycol through to a plate chiller or jacketed fermentation tank. The smaller 1.5 HP unit comes with wheels, while larger units are designed to be placed outdoors on a slab. Each outdoor chiller comes with the following features:

  • Glycol reservoir & pump
  • Control panel
  • Bypass valve
  • Insulated copper piping
  • High & low pressure controls
  • High temp alarm
  • Digital temperature readout
  • Powder coated frame
Please contact us directly to order your glycol chiller.
Click here to go to "Commercial Plate Chillers" 

Commercial plate chillers are an effective method of protecting yeast by rapidly knocking down wort and grain temperatures to desired levels, typically pumped between a brew kettle and fermentation tank. Our commercial wort chillers use a two-stage, six-way flow process, commonly used with chilled water and glycol in temperature reduction. Glacier Tanks ensures every chiller we ship comes with all of the necessary adapters to meet your brewing system setup.

  • Commercial Quality
  • Sanitary Stainless steel SS304
  • Rebuildable
  • 6 way flow
  • 2" Tri Clamp wort inlet / outlet with reducer to 1 ½" Tri Clamp
  • Glycol or chilled water inlet / outlet with 1" NPT to 2" Tri Clamp
  • Water Inlet and Outlet with 1" NPT to 2" Tri Clamp
  • Leveling feet on bottom
  • Heavy Duty Frame Construction
  • 1 year Warranty & Parts
Please contact us directly to order your plate chiller.
Click here to go to "Jet & Air Burners" 

Midco Economite Forced Air Burners

Midco Economite series power gas burners are proudly made by Midco International. Midco burners to emit concentrated flames, come with an air blower motor and are designed to be used in a closed insulated box, which we specially carry for Economite burners. Each Midco burner is UL tested and approved. Constructed from sheet metal, these burners offer excellent cost to value ratios. Each is assembled and factory tested. Installation is effortless with the integrated junction box and universal mounting flange. Burners run on natural gas, but can be converted to propane with an LP conversion kit. Glacier Tanks strongly recommends installation by a local professional, and per local codes.

  • Temperature controller hardware is sold separately.
  • Midco burners are Special Order, ship directly from Midco Int'l, and are non returnable.

Cast Iron Jet Burners

Cast iron jet burners, fueled by either propane or natural gas, are similar to turkey kettle burners and are typically only used in outdoor brewing as per most municipal codes. Jet burners can not be used in closed firebox and require substantial air intake to function properly. If allowed to be used indoors, a vent hood is usually required. Orifice sizes are #63 for propane, or #54 for natural gas, and burners come with 32, 44, or 88 tips, with each tip producing approximately 10,000 BTUs. All burners are warrantied for 1 year.

Click here to go to "Electric 3 Phase Elements" 

Electric three phase heating elements are made from stainless steel SS304 and require a 2" inch FNPT fitting for mounting. Commonly used in brew kettles or hot liquor tanks, heating elements are a versatile way to add heat wherever it may be needed. Glacier Tanks strongly recommends that heating elements | Be wired by a local professional, and that local wiring codes | Be observed. We can custom order a heating element, please just ask.

Powered by Fortune3