Glacier Tanks
Shopping
Sanitary Clamps Tri Clamp Fittings
Related Categories
Click here to go to "Single Hinge Clamps" 

Glacier Tanks single hinge pressure clamps are available in stainless steel SS304 and SS316, with sizes ranging from ¾ inch up to 12 inches. Larger sizes are available by special order. Single hinge pressure clamps are an ideal solution for most intended Tri Clamp fitting connections. The wing nut style tightening screw allows for quick and easy assembly without the need for extensive tools.

Glacier Tanks recommends that all standard single hinge pressure clamps | Be tightened by hand, with an additional maximum of two turns using a screw driver to apply proper pressure and ensure a solid, leak free seal. However, over tightening a pressure clamp may cause the gasket to fail from over-compression and place too much tension on the clamp threads.

Click here to go to "Double Hinge Clamps" 

Glacier Tanks double hinge pressure clamps are available in stainless steel SS304, with sizes ranging from 1½ inch up to 4 inches. Larger sizes are available by special order. Double hinge pressure clamps are an upgraded solution for most intended Tri Clamp fitting connections. They distribute pressure more evenly and can handle a higher pressure load than single hinge clamps. The wing nut style tightening screw allows for quick and easy assembly without the need for extensive tools.

Glacier Tanks recommends that all standard double hinge pressure clamps | Be tightened by hand, with an additional maximum of two turns using a screw driver to apply proper pressure and ensure a solid, leak free seal. However, over tightening a pressure clamp may cause the gasket to fail from over-compression and place too much tension on the clamp threads.

Click here to go to "High Pressure Clamps" 

Bolted double pin high pressure clamps are a significant upgrade from the standard clamp, with the ability to withstand twice the pressure of comparable sized single or double hinged clamps. High pressure bolted clamps are available in stainless steel SS304, with sizes ranging from 1 ½ inch up to 12 inches. Larger sizes are available by special order. Intended for Tri Clamp fitting connection, high pressure clamps are commonly used in situations where temperatures fluctuate and PTFE gaskets are installed.

Glacier Tanks recommends that all high pressure clamps be tightened to approximately 25LBs of torque to apply proper pressure and ensure a solid, leak free seal. However, over tightening a high pressure clamp may cause the gasket to fail from over-compression and place too much tension on the clamp threads.

Powered by Fortune3