Glacier Tanks
Shopping
Sanitary Valves
Related Categories
Click here to go to "Ball Valves" 

Sanitary Tri Clamp ball valves are made from stainless steel SS304 or SS316, and offer full port, unobstructed flow. A ball valve is often placed on the ends of CIP piping or racking arms. Available in economy, standard and 2-way 3-piece encapsulated, all sanitary ball valves are installed inline in any position to maximize flow capacity. Our standard or economy ball valves can handle 250 PSI, while the encapsulated models are rated up to 1000 PSI. All valve handles swing out from center, and some models allow locking of the handle.

Click here to go to "Butterfly Valves" 

Sanitary butterfly valves are an elegant and dependable solution for either a shutoff service, or as a flow control valve to reduce volume. Designed for Tri Clamp fittings and made from stainless steel SS304 or SS316, our trigger handle 5000 series | Butterfly valves feature a fiberglass handle with 12 locking positions, that allow granular flow control typically desired on a racking arm. Our pull handle valves feature a blue ball handle with 3 locking positions. Valves comes with either a silicone or EPDM seat.

Click here to go to "Butterfly Valve Seats" 
Click here to go to "Check Valves" 

Check valves, available in stainless steel SS304 or SS316, are an ideal solution along any Tri Clamp fitted system to mitigate backflow. Each Tri Clamp check valve is 3A certified to meet high sanitary standards, has a ½ PSI break pressure, and comes with an EPDM seal. Other Tri Clamp sizes are available per special order.

Click here to go to "Diaphragm Valves" 

Sanitary diaphragm valve are made from stainless steel SS316, and come with double gaskets: EPDM and PTFE. The sanitary design allows precise control of the fluid flow rate with low turbulence and minimal back pressure.

Click here to go to "Pneumatic Valves" 

Pneumatic Ball Valves

Our heavy duty pneumatic ball valves are excellent solution as an on-off service, or for flow control. Air pressure actuation is used to open and close the valve. Additional features include:

  • Precision 2-way Pneumatic Encapsulated Ball Valve
  • Encapsulated PTFE seats and Tri Clamp connection
  • In-line designed for maximum flow capacity
  • Valves may be installed at any position
  • SS316 stainless steel ball
  • PTFE Gasket Complies to PTFE FDA 177.2600
  • Full Port Design
  • Rated to 1,000 PSI WOG
  • Completely Rebuildable
  • 60-90 PSI Operating range

Pneumatic Butterfly Valves

Our heavy duty sanitary pneumatic butterfly valves are an excellent solution as an on-off service, or for flow control. Air pressure actuation is used to open and close the valve. Additional features include:

  • Stainless steel SS304 Valve & Body
  • Fireproof
  • Long Life Span
  • Maintenance-free Pneumatic Mechanism
  • Normal closing / opening time at 80 PSI is less than 1 second
  • Tested at over 100,000 cycles
  • Visual Indicator to show valve position
  • Also available in air/air
  • Suitable for normal and closed applications
Powered by Fortune3