Mini Sight Glass Assembly

Mini Sight Glass

The long awaited customizable mini sight glass is finally here. The ideal solution for inline reading of fluid flow, color, or opacity; using NPT or JIC fittings. Or, if reading a Tri-Clamp port coming off of a tank or pressure vessel, then transitioning to a JIC or NPT hose. We offer 8 connection options to fit your needs. We also use standard 3/8" Tri-Clamp Gaskets to seal the glass inline, so if your process needs more chemical resistance, changing from a Silicone to an FKM gasket is a simple switch. The high quality borosilicate gauge glass has a through bore of 5/16", maximizing the connection options and visibility, while being short enough to not drastically affect fluid flow from its bore size.

The Sight Glass Assembly - Instructions

To build a complete sight glass you will need to Add to Cart the 3 main components:

• The Core Case + 3/4 in. Glass Tube
• Two (2) 3/8 inch gaskets of your choice (FKM, Silicone)
• Two (2) sight glass ends (SGM-END-xxxx) of your choice (same or different).

Example:

• 1 x SGM-CORE-G075-003 (case + glass)
• 2 x 42MPSFY-0375-FDA (2 x FKM gaskets)
• 1 x SGM-END-GFN6 (female NPT)
• 1 x SGM-END-GMJ6 (male JIC)