Tri Clamp Strainers - Side Port & Inline
Stainless Steel Sanitary Fittings
Tri Clamp strainers are used for filtration of solids from fluid process flows. The mesh is designed to be porous enough not to clog too easily, but still trap large solids from passing through. We carry two different styles of strainer (an inline strainer, and side inlet strainer), each with unique features making them applicable for various straining situations. It is recommended that a strainer be placed after a pump, as suction could damage the strainer core. Additionally, it is very important that a strainer be placed in the correct orientation so as to not blow out the mesh. The flow direction should always push the mesh against the perforated core so that the mesh is supported properly.
Side Inlet Strainers
Tri Clamp side inlet strainers work similar to inline strainers, but with one major difference. The side inlet strainer has a removable, perforated screen core which can be cleaned, serviced, or replaced without removing the strainer housing from entire system. This allows for a more permanent mounting of the strainer housing and ease of use. The recommended placement of the strainer is after a pump, as suction could damage the strainer core. The mesh is porous enough by design to keep out the large pieces of matter while not clogging too easily.
Note: Side inlet strainers have a replaceable strainer core. We only supply this core with 150 mesh ("100 micron). There may be a lead time associated with strainer cores. The replacement mesh available on our website will NOT fit side inlet strainers.
Tri Clamp inline strainers mount similar to a spool with both ends clamped into a fitting. The mesh is designed to be porous enough so as not to clog too easily, but still trap large solids from passing through. Unfortunately due to current supply chain issues we cannot offer mesh screens for our inline strainers. It is recommended that a strainer be placed after a pump, as suction could damage the strainer core.
Notice: The strainer screens are designed for Inline Strainers only.
Glacier Tanks will accept returns of website standard stocking items, but only if:
- The item is new, unused, and in resalable condition;
- You notify Glacier Tanks and request a return authorization within 30 days of your receipt of the item;
- You return the item to Glacier Tanks, postage/shipping prepaid within 5 days of Glacier Tanks' return authorization (RMA);
Once your items have been received by Glacier Tanks and verified to be unused, we will refund your purchase price, less shipping costs. Returns will incur a 15% restocking fee. Return shipping costs are your responsibility and shall not be paid by Glacier Tanks.
The following items are non-returnable:
- Special or Discounted items - labeled by button color:
- Special Order
- Drop Ship
- Custom order
- All Gaskets & Seals
Please be sure you understand and agree to any drawings supplied to you prior to purchase of custom or special order items. Payment of deposits for custom or special order items indicates your approval and acceptance of such custom or special order items.