Tri Clamp side inlet strainers and inline strainers are available with 4 grades of fine mesh (50 mesh, 80 mesh, 100 mesh, 150 mesh), the higher the number, the less porous the mesh. The side inlet strainer is the preferred choice simply because one does not have to disconnect the whole assembly to replace or clean the screen mesh. The inline strainer performs the same function, but mounts more similar to a spool with both ends clamped into a fitting. It is recommended that a strainer be placed after a pump, but prior to a plate chiller to reduce the debris entering the chiller, and ultimately the fermentation tank. The mesh is designed to be porous enough so as not to clog easily, but still trap large solids from passing through.
Warning: Do not run backwards as you risk blowing out your mesh filter. The correct flow direction puts pressure on the mesh screen pushing against the interior perf screen which provides support.
Glacier Tanks will accept returns of website standard stocking items, but only if:
The item is new, unused, and in resellable condition;
You notify Glacier Tanks and request a return authorization within 30 days of your receipt of the item;
You return the item to Glacier Tanks, postage/shipping prepaid within 5 days of Glacier Tanks' return authorization (RMA);
Once your items have been received by Glacier Tanks and verified to be unused, we will refund your purchase price, less shipping costs. Returns will incur a 15% restocking fee. Return shipping costs are your responsibility and shall not be paid by Glacier Tanks.
The following items are non-returnable:
All Gaskets & Seals
Special or Discounted items - labeled by button color:
Please be sure you understand and agree to any drawings supplied to you prior to purchase of custom or special order items. Payment of deposits for custom or special order items indicates your approval and acceptance of such custom or special order items.