Walk-in store is OPEN. Please review our store COVID 19 shopping guidelines.
Glacier Tanks Logo - A Sanitary Fittings Company

JIC Hydraulic Hoses

37-Degree Chamfer Ends

JIC Hydraulic Hoses

Joint Industry Council (JIC) Fittings

JIC fittings are widely used in fluid applications such as the delivery of fuel or hydraulics, expecially when a higher PSI is involved. The JIC fitting uses its 37-degree chamfer seating surface to seal rather than an o-ring that could corrode. This allows them to be connected and disconnected repeatedly, such as hydraulic applications, without concern for deformation.

Advantages of JIC fittings

JIC fittings are very similar to Army-Navy fittings but with a lower tolerance and therefore are produced at a lower cost. Commonly made out of stainless steel, the hoses makes connecting and disconnecting quick and easy, and the NPT to JIC adapters allow most connections to be easily converted to a JIC system. Maintenance, particularly with stainless steel fittings is very low, and costs are usually isolated to a replacing a damaged component instead of the entire system.

Extraction Disclaimer:

  • These product(s) are intended only for uses in accordance with all federal, state, and local laws, regulations, and ordinances, and Glacier Tanks’ specifications. Depending on the type of oil you are extracting, these product(s) may not be legal to operate in some areas.
  • Glacier Tanks strongly discourages any unlawful use of these product(s) and is not responsible for any damage or injury caused by their misuse or unlawful use.
  • These product(s) are designed and intended for operation in well-ventilated outdoor areas.
  • Any person or entity that uses these product(s) or information provided by Glacier Tanks does so subject to Glacier Tanks’ Terms and Conditions, and accepts all liability concerning the use of the product(s) or information listed above.
  • DANGER! Never extract with butane or propane indoors. Doing so may cause serious injury or death.
Powered by Fortune3