Threaded Adapting Union | MNPT 1/4 in. x MJIC 1/4 in. - SS316
|Connection Type(s)||FJIC, MNPT|
|Connection Size(s)||1/4 in.|
|Pressure Rating||27.5 Mpa (3989 psi)|
|Quantity in stock||251|
Threaded fitting JIC adapter with one 1/4 inch male JIC to one 1/4 inch male NPT nipple.
Joint Industry Council (JIC) Fittings
JIC fittings are widely used in fluid applications such as the delivery of fuel or hydraulics, expecially when a higher PSI is involved. The JIC fitting uses its 37-degree chamfer seating surface to seal rather than an o-ring that could corrode. This allows them to be connected and disconnected repeatedly, such as hydraulic applications, without concern for deformation.
Advantages of JIC fittings
JIC fittings are very similar to Army-Navy fittings but with a lower tolerance and therefore are produced at a lower cost. Commonly made out of stainless steel, the braided hoses makes connecting and disconnecting quick and easy, and the NPT to JIC adapters allow most connections to be easily converted to a JIC system. Maintenance, particularly with stainless steel fittings is very low, and costs are usually isolated to a replacing a damaged component instead of the entire system.
National Pipe Taper (NPT)
NPT is a standardized fitting that is commonly used for joining pipe. Due to the tapered threads (wider diameter at the base of the threads, similar to a trapezoid) the male fitting will tighten the further it is threaded into the female. NPT follows the technical standards provided by the American National Standard Pipe Thread standards, often called national pipe thread, which is often where the confusions with NPT arises, as NPT is specifically an acronym that refers to tapered pipe.
Glacier Tanks will accept returns of website standard stocking items, but only if:
- The item is new, unused, and in resalable condition;
- You notify Glacier Tanks and request a return authorization within 30 days of your receipt of the item;
- You return the item to Glacier Tanks, postage/shipping prepaid within 5 days of Glacier Tanks' return authorization (RMA);
Once your items have been received by Glacier Tanks and verified to be unused, we will refund your purchase price, less shipping costs. Returns will incur a 15% restocking fee. Return shipping costs are your responsibility and shall not be paid by Glacier Tanks.
The following items are non-returnable:
- Special or Discounted items - labeled by button color:
- Special Order
- Drop Ship
- Custom order
- All Gaskets & Seals
Please be sure you understand and agree to any drawings supplied to you prior to purchase of custom or special order items. Payment of deposits for custom or special order items indicates your approval and acceptance of such custom or special order items.