Bottom mount vacuum/pressure gauges are often attached to monitor system or vessel pressure. Because gauge needle does not have a zero stop, a no-pressure reading can be +/- 1-2 PSI. We recommend either a teflon tape or more permanent liquid to seal the gauge.
-30hg - 300 PSI
304 Stainless Steel Casing
1/4 ;" Male NPT Fitting
+/- 3-2-3% Accuracy
Notes & Installation Instructions
To return gauge to zero after shipping, equalize the pressure using the rubber glycerin cap. This cap can either be pushed to the side to break the seal temporarily and allow the gauge to take in air, or leak some glycerin to return to zero. Or you can snip the tip of the cap per the instruction on the sticker when it is permanently installed so it will maintain zero. Gauge zero will move up and down with the local atmospheric pressure, so if cap is left un-trimmed, zeroing may need to be done periodically. The stainless steel case is filled with glycerine to protect the internals against vibration and pulsation. This prevents needle chatter and it is normal for a bubble to be in the fluid.
Gauge accuracy is maintained only in a temperature range of -40 to 140°F (-40 to 60°C), any measurement made outside of this range cannot be guaranteed accurate and may lead to malfunction. Gauges that have a +/- 3-2-3% accuracy is categorized as ASME B40.100 Grade B, meaning that the lower and upper 1/4 of the scale has 3% accuracy and the middle 1/2 is 2% accurate.
California Proposition 65 Information:
WARNING: This product can expose you to chemicals including Lead and lead compounds and Urethane (Ethyl carbamate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Glacier Tanks will accept returns of website standard stocking items, but only if:
The item is new, unused, and in resalable condition;
You notify Glacier Tanks and request a return authorization within 30 days of your receipt of the item;
You return the item to Glacier Tanks, postage/shipping prepaid within 5 days of Glacier Tanks' return authorization (RMA);
Once your items have been received by Glacier Tanks and verified to be unused, we will refund your purchase price, less shipping costs. Returns will incur a 15% restocking fee. Return shipping costs are your responsibility and shall not be paid by Glacier Tanks.
The following items are non-returnable:
All Gaskets & Seals
Special or Discounted items - labeled by button color:
Please be sure you understand and agree to any drawings supplied to you prior to purchase of custom or special order items. Payment of deposits for custom or special order items indicates your approval and acceptance of such custom or special order items.